LKAD026D-D 32W 20-40V 800mA Linear Lamp DALI dimming  led driver

Features

• 200-240Vacc(50/60Hz) Input
• Hight efficiency,hight PF,good steady;
• Isolated,DALI dimming ,adjusting much smoothly
  
• independent, ClassⅡconstant current type;
• short circuit/over load/over current/ over temperature protection;
• 100% full load burn-in test;
• degree of protection IP20;
• Special for LED linear lamp, LED grille lamp;
• 5 years warranty.

---

More Details

Model		LKAD026D-D	Remark
輸入Input	輸入電壓范圍/Input Voltage ra	200-240V
	頻率/Frequency	50/60hz
	諧波/THD	≤15%
	功率因數/Power factor	0.96/240VAC
	輸入電流 Input current（mA)	88MA/200VAC
	待機功耗 stand_by power	≦0.8W
	浪涌電流 Inrush Current(Max.)	≤30A@240VAC
	漏電流 Leakage Current	<1MA/240VAC
輸出Output	額定電壓/Rated voltage	40V
	空載電壓/No-load Voltage	60V
	工作電壓范圍/working voltage	20-40V
	可選擇電流規格/selectable cur	r                     800MA
	電流精度/Current precision	(+/-)3%
	額定功率/Rated power	40W
	開機延時/Setup Time	≤0.5s/230VAC
	輸出線性調整率Output Line Reg	u                     ±5%
	溫度漂移temperature drift	±10% Page 1 of 4

保護特性	開路保護Output open circuit p	有/Enable
	短路保護Short Circuit Protect	打嗝模式/Hiccup mode
使用環境Environmen t Requiremen	工作溫度/濕度要求Operating Temp./RH	-30～+45℃/20～95%
	儲存溫度,濕度要求Storage Temp./RH	-40～+80℃/10～95%
安全和電磁兼容Safety & EMC	認證編號/Certificate
	耐壓 withstand voltage	1500VAC/60S
	絕緣阻抗insulation resistance	500V>100M
	浪涌等級EMS immunity	IEC6100-4-5(L-N:1KV)
	安規標準Safety standard	EN61347,GB19510
	電磁干擾electromagnetic inter	EN55015,EN61000-3-2
	電磁抗干擾Electromagnetic Sus	EN61000-4-2.3.4.5.6.8.11.EN61547
其他Others	IP等級說明 IP level descripti	IP20
	質保說明Warranty instructions	3年/3 years
	尺寸/Size	0.4*243*30*21
	重量/Netweight	100g
注意事項matters needing attention	1.建議客戶在燈具供電回路中安裝過欠壓保護與浪涌保護裝置，以確保用電安全 1. pls suggest the client to instalt the unde voltage protection device and surge protection device to ensure Electricity safety 2. 電源作為整燈燈具中的一個零部件與終端設備結合使用，因EMC性能受LED燈具及走線的影   響，終端設備制造商需對整套裝置重新進行EMC確認。 2. The power supply is considered a component which will be installed a final equipment.The final equipment must be re-confirmed that it still meets EMC directives. 3. 客戶在使用電源時，注意電源通風散熱和環境溫度，超過TA時要做降額使用3.Becareful of             ambient temperature and heat dissipation during the client use this unit, When exceeding TA, the power supply shall be derated